• Valid City, State or Zip Code: Oldsmar
    Job Type : Contract
    Date: Tuesday, 23 April 2019
    CNC Operator

    Manpower is currently seeking CNC Machinist to set-up and operate CNC Machines for the Aviation Industry. Do you love working around the Aviation fields? If so, Apply now!



    LOCATION: Oldsmar, FL

    SHIFTS: 2nd (2pm - 10:30pm)

    Duration: Temp-To-Perm


    SUMMARY: Experience in CNC machining or machine operation, measuring equipment and set-up. Some CNC program edit knowledge.

    QUALIFICATIONS:

    * LIST AT LEAST 1 (2-3 preferred)
    * High School Diploma/GED

    CALL TO ACTION: Please contact Amanda McMillan at to apply today! Or click this link to APPLY NOW
  • Valid City, State or Zip Code: Newbury Park
    Job Type : Contract
    Date: Tuesday, 23 April 2019
    Manpower has an immediate opening for a SR CNC Machinist in New Bury, CA

    What's in it for you?

    * Shift: 1st shift 8:00 AM - 5:00 PM

    * Pay Rate: $30 per hour

    * Duration: 9 months

    * Location: New Bury Park, CA

    What is the Job?

    Must be able to set-up, run, and inspect parts to drawing specifications using manual mills and lathes, with no supervision.

    Perform first article inspections and correct any discrepancies between part measurements and print requirements.

    Must perform advanced set-up and fixturing of jobs

    Must be able to troubleshoot and rectify any problems.

    Should be adept in all aspects of machining and assist other machinists as needed.

    What to bring to the job?

    high school diploma or equivalent.

    Security Clearance- ITAR

    10+ year experience with Advanced Machining

    Skilled to read blueprints

    Physically fit and able to stand in one place for more than 4 hours

    Able to lift more than 25lbs unassisted

    Must have complex understanding of measuring instruments, including calipers, standard and pitch micrometers, comparators, surface plates, test indicators, coordinate measuring machines

    Must have advanced knowledge of all Manual Machines and controls and adjust quickly to changing priorities.

    What will be your edge?

    Six Sigma, 5S and Lean experience a plus
  • Valid City, State or Zip Code: Mississauga
    Job Type : Contract
    Date: Monday, 22 April 2019
    Our client, a leading Aerospace company, in Mississauga in hiring for Inspector Level 2 to perform final product inspection, perform internal process, product and test audits from time to time to ensure continued quality system integrity.

    * Perform First Article Inspections to validate products are built to drawing requirements; supporting all stages of the Integrated Product Delivery and Support life cycle (product life cycle)
    * Perform Customer Source Inspection activities as a representative of the customer.
    * Review supplier ATP, CofC, FAI reports and other documentation to ensure compliance
    * Complete inspection reports and documentation in accordance to Customer specifications
    * Notify supplier and customer of rejections, providing reasons and objective evidence
    * Interface directly with suppliers and customers
    * Input results into customer online systems
    * Drive Aerospace Regulatory and Quality standards, requirements, and expectations within the scope of the Quality Control Inspector role.
    * Promote continuous improvements and drive company's Operating System (Lean Manufacturing) practices.
    * Support Product Line and manufacturing cell rapid problem solving, and Corrective Action Board (CAB).
    * This position will have an emphasis on Aerospace electronic inspection to IPC Class 3 and other company defined requirements.

    Basic Qualifications:

    * High School diploma or equivalent.
    * Must have at least 3 years experience, within in the last 4 years, in the inspection of aerospace electronics, includes CCA or Printed Circuit BoardPWB for industry specifications such as J-STD-001 and IPC 610.

    Additional Qualifications:

    * Quality assurance experience is preferred on aircraft or field related work
    * Ability to read, understand and interpret blue prints/ drawings and other technical documents that describe the requirements and applicable criteria.
    * Ability to use most inspection tools, measuring and test equipment.
    * Ability to read and understand policies, procedures and processes.
    * Strong computer skills - knowledgeable and efficient with Microsoft Windows and enterprise software.
    * Up to date Canadian Council for Aviation and Aerospace CCAA training in Air Regulations, or Human Factors

    WE VALUE
    * Hands on work ethic
    * Regulatory understanding
    * Provide clear and concise communications
    * Greenbelt Certified
    * Proficient computer skills
    * Ability to work independently
    * Knowledge of six sigma tools
    * Ability to partner with others on projects
    * Understanding of quality processes
  • Valid City, State or Zip Code: Longueuil
    Job Type : Contract
    Date: Monday, 22 April 2019
    KEY ACCOUNTS AND LOGISTICS MANAGER - COORDONATEUR COMPTES CLIENTS ET LOGISTIQUE

    As Key Accounts and Logistics Manager you will be responsible for ensuring the transaction, fulfillment and delivery of over 650 flyaway kits to Pratt and Whitney's business aircraft customers. The manager will be reporting to the Senior Management and Business Development Team. The position is based in Longueuil, Quebec.

    YOUR ASSIGNEMENTS
    - Contact various clients accounts that are eligible to receive one of those flyaway kits or the clients already holding one but willing to exchange their current case for a smaller version
    - Manage the logistics: confirm acceptance of the order and confirm all the transport and shipping details
    - Track and manage a database of customer accounts
    - Develop tools to simplify process management
    - Liaise and coordinate with all the teams and services involved in the operation for the flawless delivery to the customers

    YOUR ASSETS
    - Excellent verbal and written communication skills
    - University degree or equivalent
    - Good track record in similar positions: clients account management, business development, logistics and coordination
    - Good knowledge or command of some of the following tolls: Fleet databases (POWER BI, TRAC), Microsoft Suite, Sharepoint, Webex
    - Strong customer relationship skills. Excellent research and information gathering skills
    - Being passionate or have some knowledge in the aeronautic industry is a big asset
    - The main language used for the position is English. French could be an asset
    - Good interpersonal skills
    - Proactive/Self-starter.
    - Quality Oriented
    - Dedicated
    - Diligent
    - Patient
    - Critical thinker
    - Detail-oriented
    - Ability to work within a Team or independently with minimal supervision.
    - Flexible

    WHAT YOU GET
    - A very competitive salary
    - Getting to work for one of the leading companies in this industry, in a vibrant international, fast paced environment
    - One of the companies that is regularly listed amongst the best employers in Canada
    - And various other advantages

    Interested by this challenge: Please provide us a copy of your resume: alexandre.oumaro@manpower.com
  • Valid City, State or Zip Code: Egg Harbor Township
    Job Type : Contract
    Date: Thursday, 18 April 2019
    Looking to pick up extra cash? Then we have a job for you!

    Demonstrators in the Egg Harbor Township NJ area are needed! We are seeking individuals to assist in testing airport scanning machines. Duties will include walking through scan machines in a secure environment. These positions are on-call/project work. Great opportunity with flexible scheduling! All individuals encouraged to apply including students, retired persons, part time workers and those that are unemployed. Fun and interesting way to make quick cash.

    Requirements:
    1. Must be over 18 years of age
    2. Must be a United States Citizen
    3. Must be able to pass the Department of Homeland Security Background Check
    4. Must be able to stand for periods of time and complete repetitive actions

    Pay Rate: $12.50-$13.50 per hour depending on project
    Hours: Mostly Day Shift but may have some evenings available.

    Contract: Temporary- on call

    APPLY TODAY!

    To apply, please register at manpower.com, then call 609-641-7600

    What's In It For You?

    Manpower benefits include Medical, Dental 401(k), Life Insurance and more with the ability to enroll after your first paycheck. Learn how Manpower can assist in your career advancement with our free training programs.

    We've got the right opportunity. Tell us why you're the right person.
  • Valid City, State or Zip Code: Longueuil
    Job Type : Contract
    Date: Thursday, 18 April 2019
    KEY ACCOUNTS AND LOGISTICS MANAGER - COORDONNATEUR COMPTES CLIENTS ET LOGISTIQUE

    As Key Accounts and Logistics Manager you will be responsible for ensuring the transaction, fulfillment and delivery of over 650 flyaway kits to Pratt and Whitney's business aircraft customers. The manager will be reporting to the Senior Management and Business Development Team. The position is based in Longueuil, Quebec.

    YOUR ASSIGNMENTS

    - Contact various clients accounts that are eligible to receive one of those flyaway kits or the clients already holding one but willing to exchange their current case for a smaller version
    - Manage the logistics: confirm acceptance of the order and confirm all the transport and shipping details
    - Track and manage a database of customer accounts
    - Develop tools to simplify process management
    - Liaise and coordinate with all the teams and services involved in the operation for the flawless delivery to the customers

    YOUR ASSETS

    - Excellent verbal and written communication skills
    - University degree or equivalent
    - Good track record in similar positions: clients account management, business development, logistics and coordination
    - Good knowledge or command of some of the following tolls: Fleet databases (POWER BI, TRAC), Microsoft Suite, Sharepoint, Webex
    - Strong customer relationship skills. Excellent research and information gathering skills
    - Being passionate or have some knowledge in the aeronautic industry is a big asset
    - The main language used for the position is English. French could be an asset
    - Good interpersonal skills
    - Proactive/Self-starter.
    - Quality Oriented
    - Dedicated
    - Diligent
    - Patient
    - Critical thinker
    - Detail-oriented
    - Ability to work within a Team or independently with minimal supervision.
    - Flexible

    WHAT YOU GET

    - A very competitive salary
    - Getting to work for one of the leading companies in this industry, in a vibrant international, fast paced environment
    - One of the companies that is regularly listed among the best employers in Canada
    - And various other advantages

    Interested by this challenge: Please provide us a copy of your resume: alexandre.oumaro@manpower.com
  • Valid City, State or Zip Code: Frederick
    Job Type : Temporary
    Date: Thursday, 18 April 2019
    Shipping/Receiving Clerk opening at local growing company! Temp to perm opportunity for applicants with shipping and receiving experience, working with enter data into the computer and shipping small packages. 1st shift position paying $15-$20/hour.
    Apply at www. Manpower.com or call today!! (301)694-8555.
  • Valid City, State or Zip Code: Longueuil
    Job Type : Contract
    Date: Monday, 15 April 2019
    Nouveau projet :

    Contrat de 12 mois.
    Salaire selon vos exigences et votre expérience.

    Notre client, une grande entreprise aéronautique dans la fabrication de moteur, est à la recherche de plusieurs personnes reliées aux achats pour un nouveau projet dans leur usine de Longueuil.
    Nous recherchons des acheteurs juniors, séniors, des personnes en négociation, possédant un DEC, un BAC ou une maîtrise.

    Voici quelques tâches :
    - Achat des matériaux et des ressources requises pour la compagnie
    - Gérer les comptes fournisseurs
    - Négocier avec les fournisseurs dans certains cas
    - Développer et engager des stratégies commerciales et de gestion de contrats avec les fournisseurs
    - Gestion des coûts
    - Établir un aperçu stratégique de la capacité de tout fournisseur et participer activement au processus d'approvisionnement
    - Gérer tous les aspects de la chaîne d'approvisionnement, la production et la logistique.

    Exigences :

    - DEC ou BAC
    - Parfaitement bilingue (Fournisseurs à majorité anglophones)
    - Esprit d'équipe
    - SAP un atout
    - Compétences en gestion de projets
    - Connaissance de l'industrie aérospatiale, un atout

    Si vous connaissez une personne qualifiée, veuillez-nous la référer, vous pourriez obtenir jusqu'à 100$ au placement de cette personne.

    Pour nos candidats habitants à l'extérieur du Canada, Voici le site internet du gouvernement : https://www.canada.ca/fr/services/immigration-citoyennete.html Lorsque que vous serez légalement apte à travailler au Canada, cela nous fera un plaisir de vous rencontrer dans notre agence et de faire votre dossier pour pouvoir vous aider dans votre recherche d'emploi.
    Compile information and records to draw up purchase orders for procurement of materials and services.
  • Valid City, State or Zip Code: Redmond
    Job Type : Contract
    Date: Monday, 15 April 2019
    Manpower needs your skills and talent, and we want you on our team. We have immediate openings for Assemblers on all shifts.

    What in it for you?

    Long term career
    Weekly Pay
    Temp to perm position
    Pay 17.50 to 19.50per hour
    What is the job?

    Assembles fabricated parts at floor stations.
    Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
    Uses hand tools and power tools to assemble units according to product specifications.
    Identifies units that fail tests or tolerance levels and repairs as necessary.
    What you will need for this job:

    Requires a high school diploma or its equivalent.
    May be required to complete an apprenticeship and/or formal training in area of specialty.
    May require 0-2 years of experience in the field or in a related area.
    Have knowledge of commonly-used concepts, practices, and procedures within a field.
    Ability to Rely on instructions and pre-established guidelines to perform the functions of the job.
    Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
    Exposure to machinery, chemical, biological, and physical risks is minimal.
  • Valid City, State or Zip Code: Mississauga
    Job Type : Contract
    Date: Monday, 15 April 2019
    Our client, a leading Aerospace company, in Mississauga in hiring for Inspector Level 2 to perform final product inspection, perform internal process, product and test audits from time to time to ensure continued quality system integrity.

    Job Duties:

    * Perform First Article Inspections to validate products are built to drawing requirements; supporting all stages of the Integrated Product Delivery and Support life cycle (product life cycle)
    * Perform Customer Source Inspection activities as a representative of the customer.
    * Review supplier ATP, CofC, FAI reports and other documentation to ensure compliance
    * Complete inspection reports and documentation in accordance to Customer specifications
    * Notify supplier and customer of rejections, providing reasons and objective evidence
    * Interface directly with suppliers and customers
    * Input results into customer online systems
    * Drive Aerospace Regulatory and Honeywell Quality standards, requirements, and expectations within the scope of the Quality Control Inspector role.
    * Promote continuous improvements and drive Honeywell Operating System (Lean Manufacturing) practices.
    * Support Product Line and manufacturing cell rapid problem solving, and Corrective Action Board (CAB).
    * This position will have an emphasis on Aerospace electronic inspection to IPC Class 3 and other Honeywell defined requirements.

    Basic Qualifications:

    * High School diploma or equivalent.
    * Must have at least 3 years experience, within in the last 4 years, in the inspection of aerospace electronics, includes CCA or Printed Circuit BoardPWB for industry specifications such as J-STD-001 and IPC 610.

    Additional Qualifications:

    * Quality assurance experience is preferred on aircraft or field related work
    * Ability to read, understand and interpret blue prints/ drawings and other technical documents that describe the requirements and applicable criteria.
    * Ability to use most inspection tools, measuring and test equipment.
    * Ability to read and understand policies, procedures and processes.
    * Strong computer skills - knowledgeable and efficient with Microsoft Windows and enterprise software.
    * Up to date Canadian Council for Aviation and Aerospace CCAA training in Air Regulations, or Human Factors

    WE VALUE
    * Hands on work ethic
    * Regulatory understanding
    * Provide clear and concise communications
    * Greenbelt Certified
    * Proficient computer skills
    * Ability to work independently
    * Knowledge of six sigma tools
    * Ability to partner with others on projects
    * Understanding of quality processes

    Start date: May 20th, 2019

    Pay: $25-28/hour

    If interested, please send your resumes to aruba.iqbal@manpower.com or call 905-276-2000 x 2808.
  • Valid City, State or Zip Code: Redmond
    Job Type : Contract
    Date: Friday, 12 April 2019
    Manpower is looking to hire Maintenance Technician II for an Aerospace Company in Redmond.

    Pay rate: $25/hr
    Shift: M-F 5:00AM - 1:30PM

    Job Summary:
    The Maintenance Technician II will install, maintain, and repair plant infrastructure, utility systems, and production equipment with minimal supervision. The following responsibilities are typical of what this position may be required to perform, however they are not all inclusive.

    Essential Functions:
    * Installs, maintains, and repairs electrical wiring to provide power and lighting for all plant and building operations
    * Installs, maintains, and repairs all required plumbing systems to support plant and building operations
    * Installs, maintains, and repairs plant equipment, pumps, and motors to meet manufacturer's specifications and plant standards
    * Performs general facility maintenance to include flooring, sheet rock, painting, boiler and air conditioning systems, and general interior building maintenance
    * Performs general exterior maintenance to include building upkeep and repairs, parking lot maintenance, and lawn and landscaping upkeep
    * General record keeping and filing
    * May be required to do other duties such as delivery and pick up of tools and equipment, furniture, assembly and moving, and the like
    * Works with hazardous materials such as paints and solvents to include storage and shipmen
    * May be required to specialize in areas such as HVAC systems, fire alarm, security and phone systems
    * Any other task assigned by supervisor or management

    Minimum Qualifications:
    * Experience: 2-4 years of experience in industrial maintenance. Previous HVAC experience required.
    * Knowledge: Training in the electrical & mechanical trades.
    * Skills/Abilities: Must be able to interpret and have working knowledge of schematics & blue prints. Must have experience with hazardous waste storage and handling.
    * Education/Certification: High School diploma or equivalent required.
    * Eligibility Requirement: Must possess a valid driver's license.

    If you are interested, please apply with your resume or call 206-241-9005 to schedule a phone interview.
  • Valid City, State or Zip Code: Redmond
    Job Type : Contract
    Date: Friday, 12 April 2019
    Manpower is looking to hire employees for an Aerospace Company located in Redmond, WA.

    Pay Rate: $19/hr - DOE
    Shift: 1st shift: 5am-1:30pm | 2nd shift: 1:30pm - 10pm

    Essential Functions:
    * Perform assigned assembly tasks
    * Prepare components prior to assembly, clean components, mark, and inspect components, subassemblies, or completed assemblies
    * Test finished assemblies
    * Set up and operate assigned equipment and machinery
    * Observe proper health and safety procedures in handling hazardous chemicals
    * Identify and report to lead or supervisor any difficulty which would affect the correctness and quality of the work in process
    * Participate in cleaning of area and machinery and take part in team meetings for improvement
    * Cross-train to work on at least 3 products
    * Complete job-related company training courses
    * Support Crane Business System (CBS) initiatives including 5S, KPI's, Standard Work, Problem Solving, and other initiatives as they arise
    * Flexible and willing to work overtime if necessary
    * Any other task assigned by supervisor or management

    Minimum Qualifications:
    * Experience: 2-5 years of Assembly experience in a manufacturing environment
    * Knowledge: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
    * Skills: Strong verbal and written communication; Good reading comprehension (understanding written sentences and paragraphs in work related documents); Basic computer skills (understanding of basic software)

    If you are interested in this position, please apply with your resume or call 206-241-9005 to set up a phone interview.
  • Valid City, State or Zip Code: Boulder
    Job Type : Contract
    Date: Friday, 12 April 2019
    Manpower is looking for a Technical Specialist for Equipment Maintenance for their BOULDER.

    The ideal candidate will have CNC (mills and lathes) maintenance experience on these machines' electrical controls. So, the emphasis is on the electrical, not on the mechanical side.

    If the candidate has experience on the following, it is a huge plus, but CNC electrical troubleshooting is mandatory.

    oRefrigeration Controls
    oElectrical Troubleshooting
    oSemiconductor Manufacturing
    oControls/PLC Systems
    oComputerized Maintenance Management Systems
    oWorking inside Clean Rooms
    oEnvironmental Testing/Screening Equipment
    oHigh-Vacuum Systems
    oWaste treatment and high purity water systems
    oMachining and Metal Working Equipment
    oMetal fabrication

    Duration: 6 months guaranteed, could be extended to 12 months, and could convert to full time after 12 months.

    For immediate consideration please submit your resume.
  • Valid City, State or Zip Code: Puyallup
    Job Type : Contract
    Date: Monday, 08 April 2019
    Manpower is seeking Layup or production assemblers to work for our client, a global Aerospace company in Puyallup, WA, whose primary customer is Boeing. This is a company that makes various plastics components that are used in the aerospace industry

    $15-$15.75
    Monday-Friday 5am-1:30pm or1:00pm-9:30pm or 9pm to 5:30am - may be asked to train on day shift
    Benefits after 90 days: Medical, Dental, Life Insurance
    What is the job?

    Assembly or Layup of plastic components
    Previous experience working with plastics or composites
    Apply hardware to sub and final assemblies
    Assembly process may include sanding, deburr, trim using small hand sander, rivet gun, power tools, cut, splice and tape work

    What you bring to the job?

    Previous experience in manufacturing, assembly, or other related fields
    Familiarity with small hand tools
    Must provide own steel toed shoes/boots
    Ability to read blueprints and written instructions
    If you are interested in this position please apply online to www.manpower.com and then call/text 253-473-5023 to get the hiring process started!

    Keywords: assembly, assemble, assembler, sand, deburr, plastics, plastic, lay up, layup, composite, foam, inspect, production, rivet, rivet gun, splice, trim, power tools, blueprints, blue print, manufacture, mfg, aerospace, aircraft, Puyallup, Sumner, Tacoma, Pierce, Pierce County, Auburn, Lakewood, Parkland, Spanaway, Graham, Summit, Fife, Pacific, Frederickson, Eatonville
  • Valid City, State or Zip Code: Wichita
    Job Type : Contract
    Date: Thursday, 04 April 2019
    FAA Electronic Technician
    $18.96 per hour
    Work Schedule: M-F 7AM-4PM
    Overtime will be available

    Job Description:
    *Constructs, maintains, and tests electrical systems and components.
    *Uses measuring and diagnostic tools to test and modify electronic parts.
    *Ensures systems and components meet established specifications.
    *Requires a high school diploma or its equivalent.
    *May be required to complete an apprenticeship and/or formal training in area of specialty.
    *May require 2-4 years of experience in the field or in a related area.
    *Familiar with standard concepts, practices, and procedures within a particular field.
    *Relies on limited experience and judgment to plan and accomplish goals.
    *Performs a variety of tasks. Works under general supervision. A certain degree of creativity and latitude is required.
    *Typically reports to a supervisor or manager.
    *Fine pitch solder required-must pass test
    *Closed toe shoes required.
    *FAA Safety sensitive position

    Requirements:
    Must be able provide 2 employment verifications
    Must have HS Diploma/GED
    Will need to consent to a Background Check and Drug Screen.
  • Valid City, State or Zip Code: Wichita
    Job Type : Contract
    Date: Thursday, 04 April 2019
    Manpower has a client that is looking for experienced sub assemblers who have worked with small part assembly, motor and actuator assembly a plus!

    Hours: 7:30am - 4pm M-F

    Pay range based on experience: $15 up

    Temp to perm opportunity for the right candidate.

    Client looking for 2-5 years with aircraft sub assemblies.

    We will trust you with completing the initial sub assembly of aircraft parts.

    You need to bring assembly experience and previous stellar attendance!

    Please have references and previous supervisor contact information included in your resume!

    Please contact one of our recruiters at (316) 265-9505
  • Valid City, State or Zip Code: Torrance
    Job Type : Contract
    Date: Thursday, 28 March 2019
    Manpower has partnered with a leading Aerospace company in the Los Angeles area who is looking to bring on new associates to be a part of its team. Do you have experience setting up machines according to work order set standard procedures? Do you have familiarity with checking parts, gauges, and precisions measuring instruments and submitting parts for inspection? If you answered YES to the questions above, we would like to speak with you!

    What's in it for you:
    *2nd Shift (4:00 pm - 12:30 am)
    *Monday-Friday with occasional OT
    *Long hours may be required with short notice
    *$13.25 per hour
    *Temp to Hire position

    What you'll be doing:
    *Setting up and completely operating any standard and specialized machines to perform secondary operations in departments to which assigned
    *Setting up machines, according to work order set standard procedures, specialized company products, and/or processes
    *Learning the set up and operation of any new machines added to the departments to which assigned
    *Checking parts with standard gauges or procession measuring instruments and submitting parts for inspection as required
    *Operating machines to ensure proper functioning and releases to and instructs operator in procedures for producing parts in conjunction with specifications

    Who were looking for:
    *1 year experience as a Machine Operator required
    *Must have a High School Diploma/GED equivalent
    *Must be able to understand and write in English
    *Must be able to lift, push and pull up to 30 pounds repetitively
    *Must have a high awareness on safety
    *Must be able to multitask
    *Must be flexible with last minute changes
    *Must be a team player
  • Valid City, State or Zip Code: Mount Laurel
    Job Type : Contract
    Date: Tuesday, 26 March 2019
    Manpower Staffing Agency is looking for reliable Assemblers for our client in Mount Laurel, NJ! Please see the position details below:

    Position: Assembler Filler
    Hours: Monday- Friday, 6:30am-3:30pm
    Pay Rate: $14.00 per hour to start
    Assignment Length: Temp to Perm

    Requirements:
    - 18 years or older
    - Ability to pass a hair follicle drug screen, and background check.
    - At least one year of directly applicable experience preferred.
    - Effectively read, write, and communicate in English and to follow written and verbal instructions.
    - Able to wear required PPE (PPE consists of: steel toe shoes, uniforms, gloves, and respirator)

    Interested? Apply Today!
  • Valid City, State or Zip Code: Redmond
    Job Type : Contract
    Date: Tuesday, 26 March 2019
    Manpower needs your skills and talent, and we want you on our team. We have immediate openings for Assemblers on all shifts.

    What in it for you?

    Long term career
    Weekly Pay
    Temp to perm position
    Pay 17.50 to 19.50per hour
    What is the job?

    Assembles fabricated parts at floor stations.
    Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
    Uses hand tools and power tools to assemble units according to product specifications.
    Identifies units that fail tests or tolerance levels and repairs as necessary.
    What you will need for this job:

    Requires a high school diploma or its equivalent.
    May be required to complete an apprenticeship and/or formal training in area of specialty.
    May require 0-2 years of experience in the field or in a related area.
    Have knowledge of commonly-used concepts, practices, and procedures within a field.
    Ability to Rely on instructions and pre-established guidelines to perform the functions of the job.
    Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
    Exposure to machinery, chemical, biological, and physical risks is minimal.